HOME‎ > ‎

Sủa servo Yaskawa

Chuyên cung cấp linh kiện, sửa chữa Servo Yaskawa Sửa chữa Servo các dòng sigma 1(SGDA, SGDB, SGDL), sigma 2(SGDM, SGDH), sigma 3(SGDS), sigma 5(SGDV), sigma 7 của Yaskawa

Các mã lỗi của servo yaskawa

  • Servo yaskawa Sigma2 báo lỗi

- A.02:  SERVOPACK EEPROM data error (Parameter damage)

- A.03: Main circuit detection error

- A.04: Parameter setting error

- A.05: Motor, SERVOPACK capacity mismatch

- A.10: Overcurrent or heatsink overheat

- A.30: Regenerative error (resistor cut off, transistor short failure)

- A.32: Regenerative overload

- A.40: Overvoltage

- A.41: Insufficient voltage

- A.51: Overspeed

- A.71: Overload (Momentary maximum load)

- A.72: Overload (Continuous maximum load)

- A.73: DB Overload

- A.74: Surge resistor overload

- A.7A: Heatsink overheat (Displayed when 30W to 1000W)

- A.81: Encoder backup alarm

- A.82: Encoder SUM check alarm

- A.83: Encoder battery alarm

- A84 Encoder absolute alarm

- A.85: Encoder overspeed

- A.86: Encoder overheat

- A.B1: Speed reference A/D error

- A.B2: Torque reference A/D error

- A.C1: Runaway

- A.C8: Encoder clear error, Multi-turn limit setting error

- A.C9: Encorder communication error

- A.CA: Encoder parameter error

- A.Cb: Encoder echoback error

- A.Do: Excessive position offset

- A.F1: Power line lost phase

Comments